Page 2
Rig Assembly The top handle mounts directly to the top of the cage. Use the black screw to securely lock the top handle into place. A single thumbscrew located on the Slide each 15 mm rod through the side of the baseplate controls the rod baseplate.
Page 3
Camera Mounting With the lens removed, slide your camera through the back of the cage. Line up the camera’s ¼”-20 threaded hole to the ¼”-20 thread screw. Looking down at the cage, turn the thumbwheel counterclockwise to mount your camera until it is securely in place. Camera Removal To remove your camera, turn the thumbwheel clockwise until it becomes free.