Advertisement
OFly
OFly QUICKSTART GUIDE
MOUNTING YOUR CAMERA
Loosen the thumb screw and slide out one of the 12" rods, in order to gain
access to easily fit your hand underneath the top portion of the small base
plate. Next, take the D-Ring and slide it through the opening. Allign the 1/4-20
threaded hole on the bottom of your camera with the D-Ring and tighten
until your camera is secure. Finally, slide the 12" rod back to it's original position
and tighten the thumb screw.
www.ikancorp.com
713-272-8822
Advertisement
