Download
Share
Print this page
Omega OCI95Z Instruction Manual
  1. Manuals
  2. Brands
  3. Omega Manuals
  4. Cooktop
  5. OCI95Z
  6. Instruction manual

Omega OCI95Z Instruction Manual

Hide thumbs

Advertisement

Quick Links

INSTRUCTION MANUAL FOR OMEGA
INDUCTION COOKTOP
OCI95Z

Advertisement

loading

Related Manuals for Omega OCI95Z

Summary of Contents for Omega OCI95Z

  • Page 1 INSTRUCTION MANUAL FOR OMEGA INDUCTION COOKTOP OCI95Z...

  • Page 3: Table Of Contents

    Welcome to the Omega Kitchen Community and thank you for choosing one of our many fantastic cooking appliances. We are confident that you will now be able to meet your cooking needs. Before you use the cooktop we strongly recommend that you read though the whole user manual which provides the description of this product and the proper use of its functions.

  • Page 4: Important Safety Warnings

    IMPORTANT SAFETY WARNINGS IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  • Page 5 31. WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in a fire. 32. If the supply cord is damaged, it must be replaced by a special cord or assembly available from Omega Service...

  • Page 6: Appliance Details

    This information can be found on the rating plate (identification plate) affixed to the underside of the appliance. Sizes: Relevant Sizes Width (mm) Length (mm) Height (mm) Cooktop Size Cut-out Size Due to continual product development, Omega reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available.

  • Page 7: Electrical Connection

    ELECTRICAL CONNECTION LOCAL AUTHORITY REQUIREMENTS Installation is only permitted by a licensed electrician and carried out according to instructions provided by the manufacturer. Incorrect installation might cause harm and damage, for which the manufacturer accepts no responsibility. Electrical Installation Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the oven’s power rating (also indicated on the identification plate).
  • Page 8 INSTALLATION The adjacent furniture must be able to withstand a minimum temperature rise of 50°C above the ambient temperature of the room it is located in, during periods of use. The power supply to the appliance must be cut off before any adjustments or maintenance work is done on it.

  • Page 9: Installation

    INSTALLATION Installation of Built-In Cooktop In order to prevent leakage of any liquids on the counter, a special sealing tape is supplied together with your cooktop. Apply this seal around the bottom edge of the cooktop (see below). The brackets are installed to hold the cooktop in place.

  • Page 10: Operating Instructions

    OPERATING INSTRUCTIONS 1. Max. 1800/2300W Zone 2. Max. 1800/2300W Zone 3. Max. 3000/3600W Zone 4. Max. 2200/3000W Zone 5. Max. 1800/2300W Zone 6. Max. 1800/2300W Zone 7. Max. 3000/3600W Zone 8. Control panel 1. Heating zone selection controls 2. Timer control 3.
  • Page 11 OPERATING INSTRUCTIONS The Boost Function The Boost function is available at each cooking zone. It is used to speed up the initial heat up time (say boil a pot of water). Select a cooking zone and set the Heat level. While the decimal point on the display is lit, press the Boost button.
  • Page 12 OPERATING INSTRUCTIONS Cooking Zone Timer (1 – 99 minutes) The Cooking Zone Timer can be set to control individual heating elements. Activate a heating element & set the heat level. While still active, press the timer button and adjust the time as for the Minute minder. Multiple heating elements can be set up with different times.

  • Page 13: Cleaning

    CLEANING NOTE: Cleaning and maintenance operations must only be carried out when the cooktop is cool (all residual heat indicators are off). The appliance should be disconnected from the power outlet or turned off at your isolation switch before commencing any cleaning process. Do not use plastic, plastic coated or aluminium cooking equipment on this appliance.

  • Page 14: Warranty

    WARRANTY...