Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Omega OCC30TZ
Summary of Contents for Omega OCC30TZ
- Page 1 INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Ceramic Cooktop OCC30TZ...
-
Page 3: Table Of Contents
CONGRATULATIONS Welcome to the Omega Kitchen Community and thank you for choosing one of our many fantastic cooking appliances. We are confident that you will now be able to meet your cooking needs. Before you use the cooktop we strongly recommend that you read though the whole user manual which provides the description of this product and the proper use of its functions. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. -
Page 5: Product Overview
D. Timer Button. E. Key Lock Button. ELECTRICAL DETAILS: Rated Voltage - 220-240Vac 50Hz OCC30TZ – 2700-3300W COOKTOP – 15A plug. This information can be found on the rating plate (identification plate) affixed to the underside of the appliance. Relevant Sizes:... -
Page 6: Operating Instructions
Operating Instructions TOUCH CONTROLS: • The controls respond to touch, so you don’t need to apply any pressure. • Use the ball of your finger, not its tip. • You will hear a beep each time a touch is registered. •... - Page 7 Once cooking has finished, press the cooking zone button for the cooking zone to be turned off. Adjust the power setting down to “0” using the decrease button, or by pressing both the decrease and increase buttons simultaneously. Turn the whole cooktop off by pressing the ON/OFF control button.
- Page 8 To set up a timer function on a cooking zone, first turn on the cooktop and select the power level. Press the cooking zone select button for the cooking zone to have the timer function. Press the timer button and the timer display will show “10” for a pre-set 10 minute timer.
- Page 9 Power Settings The settings below are guidelines only. The exact setting will depend on several factors, including your cookware and the amount you are cooking. Experiment with the cooktop to find the settings that best suit you. Power setting Suitability 1 - 2 •...
-
Page 10: Cleaning And Maintenance
Cleaning and Maintenance NOTE: Cleaning and maintenance operations must only be carried out when the cooktop is cool (all residual heat indicators are off). The appliance should be disconnected from the power outlet or turned off at your isolation switch before commencing any cleaning process. -
Page 11: Installation
Installation Cut out the work surface according to the sizes shown below. A minimum of 50mm must be left between the edge of the hole and any edge of the work surface. The work surface must be at least 30mm thick. Take care that the material of the work surface is heat resistant to at least 100ºC to avoid any damage to the work surface.
Need help?
Do you have a question about the OCC30TZ and is the answer not in the manual?
Questions and answers