PB TEEN Display-It Desk Assembly Instructions page 3

Display-It Desk Hutch
MPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two adults is recommended.
Assembly Instructions:
1. Place the Desk Hutch (A) on the assembled Desk (sold separately).
2. Line up the insert nuts on back of the Desk Hutch (A) and desk. Align and place the Bracket (D) over the
insert nuts and secure using Bolt (E), as shown below. Tighten with a Phillips Head Screwdriver.
3. Insert the Shelf Support Pegs(C) into the pre-drilled holes on the interior sides of the Desk Hutch's center
cubby (A). Place the Shelf (B) onto the Shelf Support Pegs (C).
D.
E.
E.
Parts Included:
A - Desk Hutch – 1pc
B - Shelf – 1pc
Tools Required:
Philips Head Screwdriver
www.pbteen.com
Hardware Included:
C - Shelf Support Pegs
D - Bracket
E - Bolt 5/32" x 15mm
(not included)
Care Instructions:
•
Dust with a soft, dry cloth.
•
Avoid abrasives and solvent
cleaners.
- 4pcs
- 4pcs
- 8pcs