PB TEEN Display-It Desk Assembly Instructions page 2

3. Open the top drawer of the Drawer Pedestal (B). Press the clips on both sides of the drawer-mounted
metal glides to release the drawer box from the Drawer Pedestal (B).
4. Place the Drawer Pedestal (B) on the left and the Door Pedestal (C) on the right. Insert the Wooden
Dowels (J&R) into the pre-drilled holes on the tops of the two pedestals. Align and connect the Desk Top
(A) to the Wooden Dowels (J&R). Secure the Desk Top (A) to the Drawer Pedestals using the Bolts (G),
Spring Washers (H) and Flat Washers (I). Secure the Desk Top (A) to the Door Pedestal using the Bolts
(O), Spring Washers (P) and Flat Washers (Q). Check alignment before fully tightening all bolts.
5. Place the drawer back into the Drawer Pedestal (B) with the cable of the cord set (pre-installed) going
through the cut-out on back panel. Use the Cable Clip (L) and Wood Screw (M) to secure the cable in
place when required.
6. Align and attach the Keyboard Tray (E) to the metal glides pre-installed under Desk Top (A) by pressing
the clips on both sides of the Keyboard Tray (E) and inserting the Keyboard Tray (E) into the metal glides.
CARE INSTRUCTIONS:
•
Dust with a soft, dry cloth.
•
Use furniture was as needed.
•
Avoid abrasives and solvent cleaners.
www.pbteen.com