Queue-Scheduler - H3C S3600 Series Command Manual

Command Manual – QoS-QoS Profile
H3C S3600 Series Ethernet Switches-Release 1510
6
7

1.1.15 queue-scheduler

Syntax
I. In system view
queue-scheduler { strict-priority | wfq queue0-width queue1-width queue2-width
queue3-width queue4-width queue5-width queue6-width queue7-width
queue0-weight
queue5-weight queue6-weight queue7-weight }
undo queue-scheduler
II. In Ethernet port view
queue-scheduler { wfq queue0-width queue1-width queue2-width queue3-width
queue4-width queue5-width queue6-width queue7-width | wrr queue0-weight
queue1-weight
queue6-weight queue7-weight }
undo queue-scheduler
View
System view/Ethernet port view
Parameter
strict-priority: Indicates that the queue uses strict priority (SP) scheduling algorithm.
wfq: Indicates that the queue uses weighted fair queue (WFQ) scheduling.
queue0-width queue1-width queue2-width queue3-width queue4-width queue5-width
queue6-width queue7-width: Minimum delivery bandwidth of each WFQ queue in Kbps.
Its granularity is 64 Kbps. If the number you enter is in the range of N*64 to (N+1)*64 (N
is a natural number), the switch sets the value to (N+1)*64 automatically. The value for
fast Ethernet ports is in the range of 64 to 99,968, and the value for Gigabit Ethernet
ports is in the range of 64 to 1,000,000. A value of 0 means the corresponding queue
uses the SP scheduling.
wrr: Indicates that the queue uses weighted round robin (WRR) scheduling.
queue0-weight
queue5-weight queue6-weight queue7-weight: Indicates that the queue uses the WRR
CoS value
queue1-weight queue2-weight
queue2-weight queue3-weight
queue1-weight queue2-weight
1-13
Chapter 1 QoS Commands
Local precedence
6
7
queue3-weight
queue4-weight
queue3-weight
| wrr
queue4-weight
queue5-weight
queue4-weight