Traffic-Statistic; Wred - H3C S3600 Series Command Manual

Command Manual – QoS-QoS Profile
H3C S3600 Series Ethernet Switches-Release 1510

1.1.20 traffic-statistic

Syntax
traffic-statistic inbound acl-rule
undo traffic-statistic inbound acl-rule
View
Ethernet port view
Parameter
inbound: Performs traffic statistics on the packets received by the interface.
acl-rule: Applied ACL rules which can be the combination of various ACL rules. For the
ways of combining ACLs and the description on related parameters, refer to Table 1-5
and Table 1-6.
Description
Use the traffic-statistic command to activate the ACL to identify traffic and perform
statistics on the traffic (whose action is permit).
Use the undo traffic-statistic command to cancel the traffic statistics.
The statistics generated with the traffic-statistic command includes the times
transmitted data is matched by the switch. You can use the display qos-interface
traffic-statistic command to display the statistics information.
Related command: display qos-interface traffic-statistic.
Example
# Perform traffic statistics on the packets that are received on Ethernet1/0/1 and match
the permit rule in ACL 2000.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface Ethernet 1/0/1
[H3C-Ethernet1/0/1] traffic-statistic inbound ip-group 2000

1.1.21 wred

Syntax
wred queue-index qstart probability
undo wred queue-index
View
Ethernet port view
1-20
Chapter 1 QoS Commands