Bosch+Sohn BoSo Medicus Smart User Instructions page 59

Measuring your blood pressure
Blood pressure is a dynamic parameter and
can be affected by the patient's position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
dition (stress, disease, etc.).
¬ If the measurement result is obviously
wrong, repeat the measurement.
The unit switches itself off automatically
after about 1 min. To repeat a measure-
ment, press the start button
2
min
¬ If no further measurement is required,
remove the cuff from the arm.
again.
After an interval of two minutes a
repeat measurement can take
place. Only the cuff needs to be in-
flated again.
EN
59