Table of Contents
Advertisement
VIPA System SLIO
1
General
1.1 Copyright © YASKAWA Europe GmbH
All Rights Reserved
EC conformity declaration
Conformity Information
Machinery directive
Certification
HB300 | SM-S | 02x-1SD10 | en | 20-02
This document contains proprietary information of YASKAWA and is not to be disclosed
or used except in accordance with applicable agreements.
This material is protected by copyright laws. It may not be reproduced, distributed, or
altered in any fashion by any entity (either internal or external to YASKAWA) except in
accordance with applicable agreements, contracts or licensing, without the express
written consent of YASKAWA and the business management owner of the material.
For permission to reproduce or distribute, please contact: YASKAWA Europe GmbH,
European Headquarters, Hauptstraße 185, 65760 Eschborn, Germany
Tel.: +49 6196 569 300
Fax.: +49 6196 569 398
Email: info@yaskawa.eu.com
Internet: www.yaskawa.eu.com
Every effort has been made to ensure that the information contained in
this document was complete and accurate at the time of publishing. Nev-
ertheless, the authors retain the right to modify the information.
This customer document describes all the hardware units and functions
known at the present time. Descriptions may be included for units which
are not present at the customer site. The exact scope of delivery is
described in the respective purchase contract.
Hereby, YASKAWA Europe GmbH declares that the products and systems are in compli-
ance with the essential requirements and other relevant provisions. Conformity is indi-
cated by the CE marking affixed to the product.
For more information regarding CE marking and Declaration of Conformity (DoC), please
contact your local representative of YASKAWA Europe GmbH.
The System SLIO safety modules of this manual meet all the requirements of the machi-
nery directive 2006/42/EG.
The product SLIO safety signal module was developed and certified according to the
standards specified at "Approvals, directives, standards" in chapter "Safety".
It is suited for use in applications up to category 4 / PL e of EN ISO 13849-1 and SIL 3 of
EN 62061 and IEC 61508.
Test report number: 968/M 387.07/20
Certificate number: 01/205/5301/20
Copyright © YASKAWA Europe GmbH
General
5
Advertisement
Table of Contents
