Advertisement
Quick Links
OMX-10HMIP0005 Wall Plate Transmitter
OMX-11IPHM0004 Wall Plate Receiver/Audio Extractor
HDMI Wall Plate H.264 Analog
OMX-10HMIP0005 Transmitter
Transmitter Kit Includes:
One Transmitter
One Wall Plate
One 5VDC/1A Power Adapter
with Mini Phoenix Connector
One Mini Phoenix Plug
Four 5/8 Inch Screws
Two 1/4 Inch Screws
Set Up and Installation CD
INSTALLATION & SPECIFICATIONS
Ocean Matrix
812 Kings Highway • Sauger es, NY 12477
www.oceanmatrix.com
2.0 PoE Extender
Over IP
OMX-11IPHM0004 Receiver
Audio Extractor
Receiver Kit Includes:
One Receiver
One Wall Plate
One 5VDC/1A Power Adapter
with Mini Phoenix Connector
One Mini Phoenix Plug
Four 5/8 Inch Screws
Two 1/4 Inch Screws
Set Up and Installation CD
Rev1a
Advertisement
Related Manuals for Ocean Matrix OMX-10HMIP0005
Summary of Contents for Ocean Matrix OMX-10HMIP0005
- Page 1 OMX-10HMIP0005 Wall Plate Transmitter OMX-11IPHM0004 Wall Plate Receiver/Audio Extractor HDMI Wall Plate H.264 Analog 2.0 PoE Extender Over IP INSTALLATION & SPECIFICATIONS OMX-10HMIP0005 Transmitter OMX-11IPHM0004 Receiver Audio Extractor Transmitter Kit Includes: Receiver Kit Includes: One Transmitter One Receiver ...
-
Page 2: Specifications
Ocean Matrix OMX-10HMIP0005 & OMX-11IPHM0004 Installation OMX-10HMIP0005 TRANSMITTER HMDI Input HDMI LED Indicator Light Reset (Insert pin and hold for 10 seconds. When the LED goes out, reset is complete.) Power Supply Connection Cat 5e/6 Output OMX-11IPHM0004 RECEIVER HDMI Output HDMI LED Indicator Light Reset (Insert pin and hold for 10 seconds. - Page 3 Ocean Matrix 10HMIP0005 & OMX-11IPHM0004 Installation INPUT & VESA RESOLUTIONS 50Hz 576i/576P/720P/1080P/1080i 60Hz/59.94Hz 480i/480p/720p/1080p 30Hz/29.97Hz 1080P 24Hz 1080P 25Hz 1080P CONFIGURATION—Refer to instructions on the included CD 1. When connecting a point-to-point application there is no need to configure the transmitter nor the receiver.
- Page 4 Ocean Matrix OMX-10HMIP0005 & OMX-11IPHM0004 Installation CONTINUED INSTALLATION—Refer to instructions on the included CD 2. Login in IE: 192.168.1.11 (TX default IP) or 192.168.1.12( RX default IP) Setup IP address for the TX and RX. TX requires user name: admin and password: admin ...
- Page 5 Ocean Matrix OMX-10HMIP0005 & OMX-11IPHM0004 Installation POINT-TO-POINT CONNECTION—Refer to instructions on the included CD 1. Connect cable ONLY when power is OFF. 2. Connect the source and the TX using HDMI cable. 3. Connect the HDMI display the HDMI RX using HDMI cable.
- Page 6 Ocean Matrix OMX-10HMIP0005 & OMX-11IPHM0004 Installation POINT-TO-MANY CONNECTION—Refer to instructions on the included CD 1. Set the IP addresses for the transmitter and the receiver and prepare the switch as instructed previously. 2. Connect the source device and the TX using HDMI cable.
- Page 7 Ocean Matrix OMX-10HMIP0005 & OMX-11IPHM0004 Installation MANY-TO-MANY CONNECTION—Refer to instructions on the included CD 1. Set the IP addresses for the transmitter and the receiver and prepare the switch as instructed previously. 2. Connect the source device and the TX using HDMI cable.
-
Page 8: Safety Precautions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ocean Matrix 812 Kings Highway • Sauger es, NY 12477 www.oceanmatrix.com...
Need help?
Do you have a question about the OMX-10HMIP0005 and is the answer not in the manual?
Questions and answers