Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ocean Matrix OMX-01HMBT0013
Summary of Contents for Ocean Matrix OMX-01HMBT0013
- Page 1 OMX-01HMBT0013 HDMI over HDBaseT 3.0 4K60 up to 328ft Extender Set...
- Page 2 Description: The Ocean Matrix OMX-01HMBT0013 is an HDBaseT 3.0 extender that can send uncompressed HD/UHD video and audio signals, eARC/ARC, RS-232, bi-directional IR, 1GbE ethernet, and USB2.0 signals up to 100m/328ft via a single Cat6a/7 cable. This extender is a convenient solution for extension of HDMI and other signals via a single CAT cable over long distances, making it the perfect solution for most commercial applications.
-
Page 3: Specifications
Specifications: HDMI Compliance: HDMI 2.0b HDCP Compliance: HDCP 2.2 Video Bandwidth: 18Gbps Video Resolution: Up to 4K @ 60Hz 4:4:4 Transmission Distance: 328ft / 100m (via Single Cat 6a/7C Cable) HDBaseT Bandwidth 16Gbps on Main and 2Gbps on Return Link HDR: HDR, HDR10, HDR10+, Dolby Vision, HLG Color Space: RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0 Color Depth: 8/10/12-bit... - Page 4 Operation Controls and Functions: Transmitter: Power LED Indicator - Red light indicates that the TX is powered on Link LED - Light on: TX and RX are in good connection status. Light Flashing: TX and RX are in low power mode. Light Off: TX and RX are not connected.
- Page 5 Operation Controls and Functions: Receiver: Power LED Indicator - Red light indicates that the TX is powered on Link LED - Light on: TX and RX are in good connection status. Light Flashing: TX and RX are in low power mode. Light Off: TX and RX are not connected.
-
Page 6: Connection Instructions
Connection Instructions: 1) Connect the source to the transmitter 2) Connect the display to the receiver 3) Connect a CAT6a/7 cable between the units 4) Connect the included power supply to either the transmitter or the receiver. - Page 7 Input and Output Switching: The Ocean Matrix OMX-01HMBT0013 can switch to ARC/SPDIF mode by pressing the SELECT button on the front panel of both the transmitter and receiver. The HDMI OUT port of the transmitter can turn to LOOP OUT or AUDIO ONLY through the LOOP OUT/AUDIO ONLY switch.
- Page 8 Input and Output Switching: 4) Set the Extender to ARC Mode. Then switch the LOOP OUT/AUDIO ONLY switch to left, the HDMI OUT port of the transmitter is set to LOOP OUT. 5) Set the Extender to eARC Mode. Then switch the LOOP OUT/AUDIO ONLY switch to right, the HDMI OUT port of the transmitter is set to AUDIO ONLY.
- Page 9 Audio Embedding and De-embedding: The Transmitter supports audio embedding and de-embedding. The L/R IN/OUT port can be used for audio embedding or de-embedding through the L/R IN/OUT switch. TX Audio Embedding: When the L/R IN/OUT switch is switched to left, the audio from external audio devices will be embedded to the L/R IN/OUT port.
- Page 10 USB Mode Applications: The Extender supports USB 2.0 transmission, and Host/Device is configurable. Mode 1: USB forward from TX to RX Switch the HOST/DEVICE USB switch to left, then power off and reboot the transmitter to set to USB Host mode. Meanwhile, switch the DEVICE/HOST USB switch to left, then power off and reboot the receiver to set to USB Device mode.
-
Page 11: Ir Pin Definition
IR Pin Definition: IR Receiver and Blaster pin configuration is as follows: Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ±... - Page 12 Application Example Diagram...
-
Page 13: Product Service
PRODUCT SERVICE Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged (b) Objects or liquids have gotten into the unit (c) The unit has been exposed to rain (d) The unit does not operate normally or exhibits a marked change in performance;...