Response Message Button - Comdial GCA70-313 User Manual

GCA70-313

Response Message Button

You may program a RESPONSE MESSAGE button, which allows you to send an
LCD message to a caller who has initiated a SOHVA or intercom call from an LCD
speakerphone, or to send an LCD message to an LCD speakerphone that you call
and receive a busy signal or no answer.
To store a fixed RESPONSE MESSAGE button (delivers the
same message each time it is pressed),
1. PRESS INTERCOM.
2. DIAL
3. PRESS programmable button for RESPONSE MESSAGE button
location.
4. DIAL message number (01-30) from list of messages.
NOTE: The system attendant creates the programmed messages available
for use that are listed in a table on page 49.
5. DIAL
6. PRESS SPEAKER to end.
7. LABEL button location.
Non-LCD Station User's Guide
.
to save programming.
Programming
57