Programming Speed Dial Numbers - Comdial DXP Plus Series User Manual

GCA70–258
4. Dial message number (01-30) from list of messages provided by
your system attendant or installer.
5. Press # to save programming.
6. Press SPEAKER to end.
7. Label button location.
8.4

Programming Speed Dial Numbers

To store an outside number as a speed dial number,
1. Press OPTIONS.
2. Press NEXT until SDIAL option appears.
3. Press SDIAL to choose speed dial programming.
4. Press programmable button (or 1–0 on keypad) to choose storage
location.
NOTE: You can store another number at a second level of a
programmable button by first pressing SHIFT.
5. Press line button, or dial 01–16 to select line groups 1–16, or dial
00 for system to select line.
6. Dial number you want to store (maximum 16 digits). To store a
hookflash in a number sequence, press TAP; press HOLD to store
a pause (only if needed).
7. Press SAVE, press next programmable button, and dial another
number to store.
8. Repeat previous step until finished, then press EXIT.
9. Press SPEAKER to end.
NOTE: When you are programming emergency numbers and making
test calls to emergency numbers, the Federal Communications
Commission (FCC) requires that you do the following: (1)
remain on the line and briefly explain to the dispatcher the
reason for the call; (2) always make test calls during the
off-peak hours, such as early morning or late evening.
Programming Your Telephone
LCD Speakerphone Station User's Guide 8 – 3