Advertisement
5.2 Piping Connection
(1) Position of piping connection is shown in
Figure 5.1 and 5.2.
(2) Piping Direction for the Indoor Unit Three
directions of piping connection to the indoor
unit can be performed; to the rear side, the right
side and the left side of the unit, respectively.
Therefore, most appropriate piping for a room can
be selected.
Right Side Piping
Take off the small cover from right side.
Left Side Piping
Take off the small cover from left side.
Left Side Cover
Rear Side Piping
Bend pipe backwards directly.
Right Side Cover
Small Cover
When bending the pipes, firmly fix the pipe at
the heat exchanger side.
Insulation
For Left Side Piping
Fig. 5.1 Liquid pipe
Model(KBtu/h)
07/09/12/14/17
Bend the gas pipe at the flexible pipe part.
Insulation
For Left Side Piping
Fig. 5.2 Gas pipe
Model(KBtu/h)
07/09/12/14/17
1
Contour of the Unit
For Right Side Piping
For Rear Side Piping
(unit:mm)
3
Contour of the Unit
For Right side Piping
For Rear Side Piping
(unit:mm)
8
3
Advertisement
