2. The screen displays the current IP address as shown in Figure 4-4.
> show ip
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.254
DNS Server:
DHCP Client: Disabled
Configuring IP Address
3. At the ">" prompt, enter the following command and press <Enter> as shown
in Figure 4-5.
> config ip address 192.168.1.100
> config ip submask 255.255.255.0
The previous command would apply the following settings for the FGSW-2624HPS.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
4. Repeat step 1 to check if the IP address has changed.
4.3 Storing Current Switch Configuration
At the ">" prompt, enter the following command and press <Enter>.
> save
Figure 4-6: Saving Current Configuration Command Screen
If the IP is successfully configured, the FGSW-2624HPS will apply the new IP
address setting immediately. You can access the Web interface of the FGSW-
2624HPS through the new IP address.
If you are not familiar with the console command or the related
parameter, enter "?" anytime in console to get the help descrip-
tion.
Note
10
Figure 4-4: IP Information Screen
Figure 4-5: Configuring IP Address Screen