Starting Web Management; Logging In To The Managed Poe Switch - Planet FGSD-1008HPS Quick Installation Manual

3. Starting Web Management

The following shows how to start up the Web Management of the Managed
PoE Switch. Note the Managed PoE Switch is configured through an Ethernet
connection. Please make sure the manager PC must be set to the same IP subnet
address.
For example, the default IP address of the Managed PoE Switch is 192.168.0.100,
then the manager PC should be set to 192.168.0.x (where x is a number
between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
Managed Switch
IP Address:
192.168.0.100
The following web screen is based on the FGSW-2624HPS4; the
display of the FGSW-2624HPS4 is the same as that of the FGSD-
1008HPS, FGSW-1816HPS and FGSW-2624HPS.
Note

3.1 Logging in to the Managed PoE Switch

1. Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100 (the factory default IP address or the one that you have
just changed in console) to access the Web interface.
2. When the following dialog box appears, please enter the default user name and
password "admin" (or the password you have changed via console). The login
screen in Figure 3-2 appears.
RJ45/UTP Cable
Figure 3-1: IP Management Diagram
PC / Workstation
with Telnet Client
192.168.0.x
5