Table of Contents
Advertisement
About This Manual
Organization of This Manual
Getting Started with CAN for Windows NT
Use the NI-CAN Programmer Reference Manual for Win32 for specific
information about each NI-CAN function and object, such as format,
parameters, and possible errors.
This manual is organized as follows:
•
Chapter 1, Introduction, explains how to use this manual, lists what
you need to get started and optional equipment you can order, and
briefly describes the CAN hardware and the NI-CAN software for
Windows NT.
•
Chapter 2,
Installation and
and configure the CAN hardware and the NI-CAN software for
Windows NT.
•
Chapter 3,
Verify the
and software installation.
•
Chapter 4,
Begin to Use the NI-CAN
with the NI-CAN software for Windows NT.
•
Appendix A,
Uninstall the Hardware and
to uninstall the CAN hardware and the NI-CAN software from
Windows NT.
•
Appendix B,
Cabling
requirements for CAN interfaces.
•
Appendix C,
Troubleshooting and Common
to troubleshoot problems and answers some common questions.
•
Appendix D, Specifications, describes the physical characteristics of
the CAN hardware, along with the recommended operating conditions.
•
Appendix E,
Customer
request help from National Instruments or to comment on our products
and manuals.
•
The
Glossary
contains an alphabetical list and a description of terms
used in this manual, including abbreviations, acronyms, metric
prefixes, mnemonics, and symbols.
Configuration, describes how to install
Installation, describes how to verify the hardware
Software, helps you get started
Requirements, describes the cabling
Communication, contains forms you can use to
x
Software, describes how
Questions, describes how
© National Instruments Corporation
Advertisement
Table of Contents
