Avaya 9600 Series Setup Manual page 55

Parameter name
NVVPNCFGPROF
NVVPNCOPYTOS
NVVPNENCAPS
March 2015
Default value
0
2
0
VPN Setup Guide for 9600 Series IP Telephones
Comments? infodev@avaya.com
VPN parameters
Description and value range
• 5 = RSA signatures with XAUTH
• 6 = Hybrid XAUTH
• 7 = RSA Signatures
VPN configuration profile. 1 or 2
ASCII numeric digits. Valid values
are: "0", "1", "2", "3", "5", "6", "8",
"9" or "11". See VPN configuration
profiles on page 46 for information
and a description of valid values.
Specifies whether to copy the TOS
bits from the tunneled (inner) IP
header to the tunnel (outer) IP
header. 1 ASCII numeric digit.
Values are:
• 1 = the value of the TOS bits will
be copied from the inner IP
header to the outer IP header.
• 2 = the TOS bits of the outer IP
header will be set to 0.
Specifies port numbers used for
IKE and IPsec UDP
encapsulation, and support for
NAT traversal. 1 ASCII numeric
digit. Valid values are:
• 0 = Procedures for the
negotiation of NAT traversal will
be supported as specified in
IETF RFC 3947, except that IKE
negotiation will begin with a
source port of 2070 (instead of
500), and that source port will
continue to be used unless the
source and destination port
numbers are changed to 4500
per RFC 3947.
• 1 = UDP encapsulation of the
"inner" IP layer will not be
provided. The procedures for the
negotiation of NAT traversal
specified in IETF RFC 3947 will
not be supported.
• 2 = Procedures for the
negotiation of NAT traversal will
be supported as specified in
IETF RFC 3947, except that IKE
Table continues...
55