Monitor Operation; General Operation; Command Input - Fujitsu F2MC-16L Series User Manual

AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA

Monitor Operation

AAAA AAAA AAAA AAAA AAAA AAAA AAAA
3.
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA

3.1. General Operation

The monitor can be operated via a PC terminal, like the terminal window of ProMan
(Fujitsu's Programming Manager), the included mini terminal "MT.com" or any other terminal
program.
The default communication parameters are 9600 baud, 8 bit, no parity, 2 stop bits. If possible,
ANSI terminal emulation should be activated.
After pressing the Monitor Reset Button, only the Power LED on the evaluation board should
be active and a message from the Monitor should appear on the terminal. The monitor is then
ready for command input.
3.1.1.
Commands can be entered, if the monitor has posted the command prompt ">".
This is important since the RS232 interface is realised by a software polling procedure and
characters will get lost if the monitor is busy while characters are typed in.
A command is input by typing the command word or a significant part of it plus appropriate
parameters. The RETURN-key terminates input and executes the command.
The number of letters necessary for command identification depends on the other commands
with same leading letters. For some commands a list with possible (defined) options can be
displayed by typing a comma ',' as parameter (e.g. "baud ,↵").
The monitor provides the following edit functions:
•
Mis-typed characters can be erased by using the BACKSPACE key.
•
The whole line can be erased by using the DELETE key.
•
Pressing the TAB key, will automatically re-type one of four previous commands. Pressing
again re-types the next.
•
A complete command line can be skipped by pressing the ESC key.
It depends on the terminal whether an edit function is available or not.
- 16 -
FUJITSU MB90675-Evaluation Board - User Manual
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA

Command Input

AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
© FUJITSU Mikroelektronik GmbH 1996
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA A
AAAA AAAA A A
AAAA AAAA
AAAA AAAA A A
AAAA AAAA
AAAA AAAA A A
AAAA AAAA
© ©