Chevrolet Sonic 2014 Owner's Manual page 46

46 Seats, restraints
ISOFIX child restraint
systems
In the past, child restraints have been
attached to a vehicle's seat by seat
belts. As a result, child restraints were
often installed incorrectly or too
loosely to adequately protect your
child.
We now equip your vehicle with
ISOFIX low anchorages at the two
rear outboard seating positions and
with Top-tether anchorages in the
rear seat backward (Notchback-back
of headrests / Hatchback-back of rear
seat backrest panels) allowing child
restraints to be attached to the rear
seats.
To install a child restraint which
comes equipped with ISOFIX low and
Top-tether anchorage attachments,
follow the instructions supplied with
your child restraint.
Please take the time to carefully read
and follow all of the instructions on the
following pages and the instructions
supplied with your child restraint.
Your child's safety depends on it!
If you have questions, or any doubts
whether you have installed your child
restraint properly, contact the child
restraint manufacturer. If you are still
having trouble installing the child
restraint in your vehicle, we
recommend that you consult your
authorized workshop.
Installation of ISOFIX child restraint
systems:
1. Select one of the rear outboard
seating positions for installation of
the child restraint.
2. Locate the two lower anchor
positions. The location of each
lower anchor is identified with a
circular marking on the lower
edge of the rear seat backrest.
3. Make sure there are no foreign
objects around lower anchors,
including seat belt buckles or seat
belts. Foreign objects can
interfere with the proper latching
of the child restraint to the
anchors.