170
Vehicle care
Headlights
Low beam and high beam
1. Remove protective cover.
2. Press spring clip, disengage it.
3. Remove bulb from reflector
housing.
4. Detach plug connector from bulb.
5. Replace the bulb and plug
connector onto bulb.
6. When fitting a new bulb, engage
the lugs in the recesses on the
reflector.
7. Engage the spring clip.
8. Place headlight protective cover
in position and close.
Vehicles with halogen headlamp
system when driving abroad
The adjusting screws are located
above the low beam cap.
Turn the adjusting screws with the
screwdriver clockwise for half a turn.