Chevrolet Sonic 2014 Owner's Manual page 119

System Configuration → Bluetooth
Settings → Bluetooth → Change
Bluetooth Code.)
The Infotainment system can be
found by searching the to-be-
connected Bluetooth device.
Enter the security code for the
Infotainment system through the
Bluetooth device.
If the registration of the device to be
connected to the Infotainment system
is successful, then the screen will
display the information of the
Bluetooth device.
■ The Infotainment system can
register up to five Bluetooth
devices.
■ In some Bluetooth devices, it is only
possible to use it when the Always
connect item is set.
Connecting/deleting/separating the
Bluetooth devices
Caution
If there is a Bluetooth device
already connected, that device
needs to be disconnected first.
Infotainment system
Firstly, set up the Bluetooth device to
be connected from the Bluetooth
setup menu to enable other devices
to search for the Bluetooth device.
Press the CONFIG button, and use
the MENU button with TUNE dial, to
move to System Configuration →
Bluetooth Settings → Bluetooth →
Device List and then press the
MENU button.
Use the MENU button with TUNE dial
to move from the registered Bluetooth
device to the device to be connected,
and then press the MENU button.
119