How To Change Various Setting - Sharp DW-J27FA Operation Manual

OPERATION

HOW TO CHANGE VARIOUS SETTING

You can change the functions in the table "Type of setting".
Turn off the Main Unit power.
1.
2. ♪
more 3 sec.
Select "Function number".
3.
Forward
♪
or
Set
4. Select "Setting number".
Forward
♪
or
Set
Press Power ON/OFF Button to
5.
fi nish the setting mode.
♪
〜
Auto Restart
Reverse
Sound Indicator Setting
♪
････
♪
Light Control
Reverse
♪
PLASMACLUSTER ION
ON/OFF
♪
Auto Off
Adjusting Sensor Sensitivity (F6-F8)
Turn off
Type of setting
Function
If the Main Unit is
unplugged or if there is a
power failure, the Main Unit
will resume operation with
the previous settings after
power is restored.
You can turn off the beeping
sound when the Main Unit
stops perating as follows.
When the Main Unit stops
operating as the following
situation, you can turn off
the beeping sound.
You can select the
brightness of the Front
Display.
The operation will stop
automatically after 12 hours in
case the Main Unit has been
forgotten to be turned off.
Light Sensor
Dust(sensitive)
Sensor
Odor Sensor
EN-10
Setting
Cancellation
(default)
ON
Cancellation
(default)
ON
Turn off
When set to "Turn off", the
"Darker" light illuminates for 8
seconds after operation starts
and then the light turns off.
The FULL Light fl ashes darker
only when the Water Tank is full.
Darker
(default)
Auto
Light automatically switches
based on room brightness.
Room Front Display
bright brighter
dark darker
* When "SLEEP" mode operate;
Room is bright : light is darker
Room is dark : light is OFF
OFF
(default)
ON
Cancellation
(default)
ON
Low
(default)
Standard
High
* Light Sensor : Default is "Middle".
Dust(sensitive) and Odor Sensor : Default is "High".