Vermont Castings VCS5017 User's Manual & Assembly page 22

VCS4007 / VCS4017 / VCS4027 / VCS4037 / VCS5007 / VCS5017 /
Step 6: Secure Shelves
Parts Required:
(4) 10-24 x 1/2" Bolts (black)
Secure each Shelf by inserting (2) 10-24 x 1/2" bolts
A.
through the U-Clip fasteners as shown in the diagram.
Tighten the four (4) Shelf Support bolts from Step 4 to
B.
secure the shelf supports to the grill body.
Repeat Steps 5 & 6 for the opposite side of the grill.
Step 7: Secure Side Shelf to Grill
Parts Required:
(3) 10-24 x 1/2" Bolts (black)
Lift the grill lid and insert two (2) #10-24 x 1/2" bolts,
shown as "a" and "b" in Fig. 7, to further secure the
Shelf Right - S/B to the grill body. Be sure to fully
tighten the bolts before proceeding to the next step.
Next: Repeat Step 7 on the opposite side of the grill's
interior to secure the Shelf Left - Solid to the grill body
by inserting only one (1) #10-24 x 1/2" bolt in the "b"
location as shown in the illustration.
Step 8: Secure Condiment Tray to Console
Parts Required:
(2) #10-24 x 1/2" Bolts (stainless)
(2) #10-24 Nuts (black)
Secure the Left Condiment Tray to the Console using a
#10-24 x 1/2" stainless bolt and a #10-24 nut. Make sure
the holes of the Condiment Tray and the Console are
aligned. Reach underneath the console and hold the nut
in place with one finger and insert the bolt from the
outside as shown in Fig. 8 and tighten until they are
securely fastened.
Next: Repeat Step 5 to secure the Right Condiment Tray
to the opposite side of the console.
VCS50
Fig. 6
A.
Insert
B.
Bolts
Tighten
Bolts
Bolt
Nut
Fig. 8
Page 4
27 / VCS50 37 Assembly
Bolt "a"
Bolt "b"
Fig. 7