Tools Required: knife or scissors, Phillips or Robertson (square head) screwdriver..
Model VCS4007
Shown
Step 1: Unpack Carton and Verify Contents
Use a sharp cutting tool to cut the straps on the packaging and then lift off the carton top. The sleeve
surrounding the barbecue can be removed by lifting it straight up and over the top of the unit.
all contents to the parts list that accompanies this assembly manual.
coverings from the metal parts
removing the protective plastic. Refer to the parts list for fastener detail.
Some parts may have sharp edges; to avoid injury, wearing gloves during assembly is
CAUTION:
strongly recommended
VCS4007 / VCS4017 / VCS4027 / VCS4037
VCS5007 / VCS5017 /
ASSEMBLY PROCEDURES
. Be careful not to scratch or damage the finish of the metal parts when
VCS50
27
/ VCS50
Next,
Page 1
37
Compare
remove the protective plastic
50004062 11/06 Rev.0 En