Vermont Castings VCS5017 User's Manual & Assembly page 21

VCS4007 / VCS4017 / VCS4027 / VCS4037 / VCS5007 / VCS5017 /
Step 4: Install the Side Shelf Supports
Parts Required:
(1) Left Side Shelf Support
(1) Left Condiment Tray
(1) Right Side Shelf Support
(1) Right Condiment Tray
(8) 1/4-20 x 1-1/2" Bolts
Only the right side assembly is shown in Fig. 4a
Note:
and Fig. 4b. To install Left Side Support and Condiment
Tray, repeat this step for the left side.
On the right side of the barbecue there are four threaded
inserts, screw a bolt half way into each of the four
threaded inserts. You will notice the bottom slot of the
support has a 'Y' shaped slot and a 'keyhole' shaped hole
above it. Take the Right Side Shelf Support and slide the
top screw into the 'keyhole' and the bottom screw into the
opening of the 'Y' shaped slot. Now take the Right
Condiment Tray and align its holes over the two front
bolts and gently push down until the bolts settle into the
grooves of the tray.
Next: Gently push down on the support until the screw
settles into the top of the groove. Do not fully tighten the
support screws at this point.
Step 5: Attach Shelves
Parts Required:
(1) Right Shelf - S/B (Shown)
(1) Left Shelf - Solid
Place the Right Shelf - S/B (shown) on top of the
supports making sure the holes are aligned and then snap
into place on the supports. The inside lip of the shelf will
slide between the grill shell and the shelf supports.
Fig. 4a
Fig. 4b
Fig. 5
Page 3
VCS50 27 / VCS50 37 Assembly
Bolts
Then Snap
Into Place
Slide End
On First
Bolts