METHVEN Kiri 113 Installation Manual

Basin mixer

Download this manual

Enlarged version

Methven warrants this product against manufacturing defects and that it is suitable for use

under the operating conditions specified in this instruction sheet.

For your warranty please refer to www.methven.com or call Customer Service

New Zealand

0800 804 222

435024

Australia

1300 638 483

0800 195 1602

KIRI BASIN MIXER

INSTALLATION GUIDE

TECHNICAL SPECIFICATIONS

Operating Pressure:

Min 0.35 bar, Max 10 bar.

Recommended 1.5 bar - 5 bar.

Recommended installation of a pressure

limiting valve if supply exceeds 5 bar.

Operating Temperature:

Hot: Max 80°C.

Cold: Min 5°C.

Notes:

●

After installation all connections

must be checked for leaks.

●

All installations must be carried

out in compliance with relevant

water regulations.

Issue A

Need help?

Do you have a question about the Kiri 113 and is the answer not in the manual?

Page 1 Methven warrants this product against manufacturing defects and that it is suitable for use under the operating conditions specified in this instruction sheet. For your warranty please refer to www.methven.com or call Customer Service...
Page 2 IMPORTANT All pipework must be thoroughly flushed prior to the installation of the mixer. Inline filters (not supplied) must be fitted on both hot and cold supplies to prevent foreign particles damaging Please read all of the instructions before installation the ceramic cartridge.