Table of Contents
Advertisement
References
Source name
Display information: Main display (supplementary)
BT AUDIO
Song title (Artist)
time (Date)
back to the beginning
AUX
Source name (Date)
Song title (Album title)
Song title (Date)
Troubleshooting
Symptom
Playing
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
The unit does not work at all.
Correct characters are not
displayed.
"ERROR"/"FAILED"
• Radio reception is poor.
• Static noise while listening
to the radio.
Playback order is not as
intended.
Elapsed playing time is not
correct.
"READING" keeps flashing.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 6)
Reset the unit. (Page 4)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 7), some characters may not be displayed
correctly.
Your steering remote controller is not compatible,
learning may not be completed. Consult your car audio
dealer for details.
Connect the antenna firmly.
The playback order is determined by the order in which
file name were recorded (USB).
This depends on the recording process earlier (USB).
• Do not use too many hierarchical levels and folders.
• Reattach the device (USB/iPod/iPhone).
ENGLISH
33
Hide quick links:
Advertisement
Table of Contents
