Bluetooth — Audio; Listen To The Audio Player Via Bluetooth; Listen To Ipod/Iphone Via Bluetooth - Kenwood DPX-M3200BT Instruction Manual

Bluetooth®
Bluetooth — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.

Listen to the audio player via Bluetooth

1 Press B SRC repeatedly (or press SRC on the remote control) to select
BT AUDIO.
• Pressing enters BT AUDIO directly.
2
Operate the audio player via Bluetooth to start playback.
To On the faceplate
Press 6 IW.
Play back/pause
Select group or folder Press 1
Reverse skip/ Press S / T.
Forward skip
Reverse/Fast-forward Press and hold S / T. Press and hold S /
20
ENGLISH
On the remote control
Press ENT IW.
/ 2 .
Press #FM+/ AM–.
*
Press S / T (+).
T (+).
To
Repeat play
Random play
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
* Depending on the connected device, some devices may not support this feature.
Operations and display indications may differ according to their availability
on the connected device.

Listen to iPod/iPhone via Bluetooth

You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page 9)
• If you plug in an iPod/iPhone to the USB input terminal while listening to
iPod BT source, the source automatically changes to iPod USB source.
Press B SRC to select iPod BT source if the device is still connected via
Bluetooth.
On the faceplate
Press 4 repeatedly.
[ALL REPEAT]/[FILE REPEAT]/[GROUP REPEAT]*/
[REPEAT OFF]
Press and hold 3 to select [ALL RANDOM]
or [GROUP RANDOM]*.
• Press 3 to select [RANDOM OFF].
Refer to "Select a file to play" on page 10.
Press 5.
(Pressing the "Play" key on the connected
device itself also causes switching of sound
output from the device.)