Bluetooth - Audio - Kenwood KMM-BT332 Instruction Manual

Bluetooth®
[INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; [NO]: Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears on the display.
2
Search and select the name of your receiver ("KMM-BT332"/
"KMM-BT270U"/"KMM-BT232U"/"KMR-M332BT") on the Bluetooth
device.
3
Operate the Bluetooth device to confirm pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold B SRC to turn off the unit.
Bluetooth — Audio
• Operations and display indications may differ according to their availability
on the connected device.
• Depending on the connected device, some features may not work with
your device.
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
Press B SRC repeatedly (or press SRC on the remote control) to select
1
BT AUDIO.
• Pressing enters BT AUDIO directly.
2
Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press 6 IW.
Select group or folder Press 2
Press S / T.
Reverse skip/
Forward skip
Reverse/Fast-forward Press and hold S / T. Press and hold S /
On the remote control
Press ENT IW.
/ 1 . Press #FM+/ AM–.
Press S / T (+).
T (+).
ENGLISH
21