Table of Contents
Advertisement
HL-190 D25 4WD/P/N / HL-220 D25 4WD/P/N
B-165DL25 4WD/P/N / B-195DL25 4WD/P/N
Rev. A
Safety
2
Emergency procedures
2.1
Emergency stop
2.1.1
To disable all of the scissor lift's functions:
Press the emergency stop button.
Contact with electrical (high voltage) cables
2.1.2
If the scissor lift comes into contact with electrical (high voltage) cables:
1.
Remain on the platform.
2.
Move the scissor lift out of the danger area.
3.
Make sure bystanders do not touch the scissor lift.
4.
Disconnect the electrical (high voltage) cables.
5.
Only exit the scissor lift after the electrical (high voltage) cables have been disconnected.
Safety instructions
2.2
General information
2.2.1
Avoid any situation that may endanger the users of the scissor lift or any bystanders.
It is strictly forbidden to:
•
Attach overhanging loads to the scissor lift.
•
Attach advertising boards or banners to the scissor lift.
•
Increase the working platform's surface area.
•
Stand on the platform's railings.
•
Raise the height of the platform's floor.
•
Tow the scissor lift on public roads.
After every (large) repair, the scissor lift must be inspected and approved by an expert.
If any modifications or repairs are carried out which may affect the scissor lift's stability,
strength or performance, the scissor lift must be reinspected and approved by HOLLAND
LIFT INTERNATIONAL B.V..
Any inspections, tests, repairs or alterations must be recorded in the scissor lift's logbook.
The weighted root mean square acceleration value (vibrations) that the user is subjected to
during use of the scissor lift is not greater than 2.5 m/s
The airborne noise produced by the scissor lift in the work area at a distance of 7 metres and
at a maximum load is not greater than 87 dB(A).
Exposure to the airborne noise over a long period of time may have a harmful effect on the
ears if ear protection is not worn.
5/2/18
2
.
Page 9
Hide quick links:
Advertisement
Table of Contents
