Overload Safety Device; 2.7.10 Lifting Cylinder Safety Device - HOLLAND LIFT HL-190 D25 4WD/P/N User Manual

HL-190 D25 4WD/P/N / HL-220 D25 4WD/P/N
B-165DL25 4WD/P/N / B-195DL25 4WD/P/N
Rev. A

Overload safety device

2.7.9
The overload safety device informs the operator when the platform is overloaded. If the permitted
load is exceeded (between 100-120%), all of the scissor lift's movement functions will be
deactivated. An acoustic signal will also sound for 5 seconds every minute and the overload light
with be lit. When the overload safety device is activated the excess load must be removed, after
which the scissor lift's movement functions will become active again. It is recommended that
persons on the platform take communication equipment with them for use in the event of a
malfunction.

2.7.10 Lifting cylinder safety device

A proximity switch prevents an internal mechanical stop from being hit in the lifting cylinder

just before the maximum stroke is reached.
1.
Knob
2.
Proximity switch
5/2/18
Lifting cylinder safety device
Page 23