HL-190 D25 4WD/P/N / HL-220 D25 4WD/P/N
B-165DL25 4WD/P/N / B-195DL25 4WD/P/N
Rev. A
General information
1
Use of this instruction manual
1.1
Objective
1.1.1
This instruction manual is intended for the users of the following scissor lifts:
HL-190 D25 4WD/P/N / B-165DL25 4WD/P/N
HL-220 D25 4WD/P/N / B-195DL25 4WD/P/N
Symbols used in this instruction manual
1.1.2
Comment
A comment gives additional information.
Note!
If an instruction with this symbol and title is ignored, it may result in the scissor lift becoming
damaged.
Warning
If an instruction with this symbol and title is ignored, it may lead to serious physical injury or
serious damage to the scissor lift.
Standard equipment
1.2
1.
Control box with a plug-in connection, which can be used on the bottom carriage and on the
platform.
2.
Auxilliary switch for raising and lowering in the valve/electrical compartment.
3.
Proportional drive.
4.
Unidirectional extendable platform.
Additional documentation
1.3
HATZ
diesel engine documentation set.
Parts catalogue.
Electrical and hydraulic diagram.
Logbook.
Optional extras
1.4
230 V AC connection on the platform.
Flashing lights in addition to the acoustic driving alarm.
Sliding door on the side of the platform.
Possibility to drive the scissor lift when fully extended.
Easylube
5/2/18
lubrication system (10 lubrication points).
Page 5