Normal Use; Preparations Before Use; Starting; Turning Off - HOLLAND LIFT HL-190 D25 4WD/P/N User Manual

HL-190 D25 4WD/P/N / HL-220 D25 4WD/P/N
B-165DL25 4WD/P/N / B-195DL25 4WD/P/N
Rev. A

Normal use

6

Preparations before use

6.1
See the diesel engine's instruction manual for instructions on how to prepare the engine.

Starting

6.2
1.
Insert the key (1) into the main switch.
2.
Rotate the key a quarter of a turn clockwise.
• The power for the scissor lift will now be turned on.
3.
Access the platform via the step.
4.
Set the scissor skirt and all the locks in the correct positions.
5.
Check whether the control box is connected.
6.
Pull out the emergency stop button.
• The scissor lift will check the overload safety device. A warning signal will sound for 10
seconds. 
Once the warning sound no longer sounds, the scissor lift can be operated via the control
box.

Turning off

6.3
1.
Retract the platform (if necessary).
2.
Lower the platform.
3.
Turn off the engine.
4.
Press the emergency stop button.
5.
Disconnect the control box and store it safely.
6.
Rotate the key in the main switch a quarter of a turn anticlockwise.
7.
Remove the key from the main switch.
5/2/18
Main switch and key
Page 32