KTM 125 SX 2017 Setup Instructions page 9

2 SETUP
–
Position spring as shown.
Spring
K00621-11
–
Press the spring with special tool
Pliers for footrest spring (79029083000)
The special tool is applied to area
–
Mount pin
K00622-11
–
Mount the washer and split pin
K00623-11
(All XC models)
–
Recharge the battery. (
–
Install the battery. (
K00618-10
–
Position the frame protector on the left and right.
–
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount and tighten screws
Guideline
Screw, frame protector
K00512-12
–
Mount the cable tie(s).
 
engages in area .

.

.
 .
p. 11)
p. 12)

with the washers.

.

on the footrest.
M5 3 Nm (2.2 lbf ft)
M5 3 Nm (2.2 lbf ft)
7