Download Print this page

KTM 125 SX 2017 Setup Instructions page 14

Hide thumbs Also See for 125 SX 2017:

Advertisement

3
WORK
Info
Even when there is no load on the battery, it discharges steadily.
The charging level and the method of charging are very important for the service life of the battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the charging current, charging voltage, or charging time are exceeded, the battery will be destroyed.
If the battery is depleted by repeated starting, the battery must be charged immediately.
If the battery is left in a discharged state for an extended period, it will become over-discharged and sulfated, destroying the
battery.
The battery is maintenance-free.
3.7
Installing the battery (All XC models)
Preparatory work
Remove the seat. (
Main work
Connect the battery charger to the battery. Set the battery charger.
Alternative 1
Battery charger XCharge-professional EU (00029095050)
Alternative 2
Battery charger XCharge-professional US (00029095051)
Alternative 3
Battery charger XCharge-professional GB (00029095052)
311910-10
Alternative 4
Battery charger XCharge-professional CH (00029095053)
Info
Follow the instructions of the charger and the manual.
Disconnect the battery charger after charging the battery.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
Finishing work
Mount the seat. (
Main work
Position the battery in the battery compartment with the terminals facing forward,
and secure with holding bracket
Battery (HJTZ5S-FP)
Mount and tighten screw
Guideline
Remaining screws, chassis
Connect positive cable
Guideline
Screw, battery terminal
Contact disks
the claws toward the battery terminal.
Slide positive terminal cover
Connect negative cable
Guideline
H00386-10
Screw, battery terminal
Finishing work
Mount the seat. (
p. 13)
p. 13)
.
.
to the battery.
must be mounted under screws
over the positive terminal.
to the battery.
p. 13)
3 months
M6
10 Nm (7.4 lbf ft)
M5
2.5 Nm
(1.84 lbf ft)
and cable sockets
M5
2.5 Nm
(1.84 lbf ft)
12
with

Advertisement

loading