Advertisement
3
WORK
3.8
Installing the start number plate
3.9
Removing the seat
3.10
Mounting the seat
3.11
Refueling
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
–
Connect the brake line at the start number plate.
–
Position the start number plate.
The holding lugs engage in the fender.
–
Mount and tighten screw
F00013-10
–
Remove screws
–
Raise the rear of the seat, pull the seat back, and lift it off.
F00017-10
–
Mount the front of the seat on the collar bushing of the fuel tank, lower the seat at
the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
F00016-10
–
Mount and tighten screws
Guideline
Remaining screws, chassis
F00017-10
.
.
.
M6
10 Nm (7.4 lbf ft)
13
Advertisement
