Advertisement
2
SETUP
2.1
Unpacking and setting up the vehicle
Package 2
–
Remove the box and the plastic film.
–
Remove the separate enclosure and unpack it. Check that everything is
included and complete using the enclosed packing list.
–
Have a lift stand available.
B02176-10
Lift stand (78129955100)
–
Carefully loosen and remove the tension belt of the footrest mount.
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
402050-01
Package 12
–
Remove the box and the plastic film.
–
Remove the separate enclosure and unpack it. Check that everything is
included and complete using the enclosed packing list.
B02008-10
–
Have a lift stand available.
Lift stand (78129955100)
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
402051-01
–
Remove the cardboard from around the shock absorber.
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever to angle lever
–
Mount and tighten screw
Guideline
Screw, bottom shock
K00613-10
absorber
Info
To avoid damaging the motorcycle during the setup, leave the protective
film on the vehicle until you have finished.
Info
An assistant prevents the motorcycle from falling over.
Info
An assistant prevents the motorcycle from falling over.
To avoid damaging the motorcycle during the setup, leave the protective
film on the vehicle until you have finished.
.
.
M10
M14x1.5
80 Nm (59 lbf ft)
60 Nm
Loctite
®
(44.3 lbf ft)
3
2701™
Advertisement
