VERITAS NetBackup 5330 Hardware Service Procedure page 4

HSP #146: Replacing a Fibre Channel SFP optical transceiver module in a Primary Storage Shelf
6 Use the lever to pull the SFP module straight out of the appliance.
To install a Fibre Channel SFP optical transceiver module
1 Put on an ESD-compliant wrist strap or take other ESD-protective measures.
Note: The static discharged by human bodies can damage static-sensitive components on the
boards. When installing and maintaining the equipment, you must observe appropriate electrostatic
safety precautions to prevent personnel injuries or device damage.
To review electrostatic safety precautions, see the topic titled Electrical safety found earlier in
this document.
4