Warning And Error Messages - RC-Plus C-BOX 200 DUO Instruction Manual

WARNING AND ERROR MESSAGES

1. Battery Type Select Error
The charger has detected a battery type selection error. Select the correct
battery type.
2. Battery Not Connected
The battery is not or incorrectly connected to the charger. Check the cable.
3. Short Circuit Error
Short circuit detected, check cables and connectors.
4. Input Voltage Error
The supply voltage is too low or too high. Check.
5. Battery Low Voltage
The battery voltage is lower than the voltage setting.
Check the number of cells in the battery and adjust.
6. Battery High Voltage
The battery voltage is higher than the voltage setting.
Check the number of cells in the battery and adjust.
7. Cell Low Voltage
A cell displays a voltage that is too low. Check the voltage of all cells. The cell
may be defective. The battery is unusable.
8. Cell Voltage High
A cell shows too high a voltage. Check the voltage of all cells. Re-balance the
battery.
9. Balance Port Connect Break
Disconnect the balancing port, make sure the cable is connected.
10. Load Overheating
Overheat, allow the battery and/or charger to cool.
11. Output Polarity reversed
Polarity error on the charging cable, check the + and -.
12. Current Add too Fast
The charging current is increasing too fast. Stop and return to the beginning
of the charging program. Self-protection.
14