29-Cleaning And Maintenance - MCZ MUSA Hydromatic 16 M1 Installation Manual

29-CLEANING AND MAINTENANCE

EXAMPLE OF A CLEAN BRAZIER
Only a proper maintainance and cleaning of the product can assure you the correct functionality and a safe use of your stove.
ATTENTION!
All the cleaning operations of all parts must be performed with the product completely cold and the plug
disconnected.
Disconnect the product from the 230V power supply before performing any maintenance operation.
The product requires little maintenance if used with certified high quality pellets.
DAILY OR WEEKLY CLEANING PERFORMED BY THE USER
Ash pan cleaning
Press door "H" at the bottom right and open it. Turn the handle of door "G" to the right and open it by moving it downwards.
Remove and empty ash pan "D". Wipe away any residual ash before reinserting the pan. Your experience and the quality of the pellets will
determine the ash pan cleaning frequency. However, it is recommended not to exceed 2 or 3 days.
When cleaning the ash pan, we recommend removing piece "C" near the brazier and use the nozzle of the vacuum cleaner to remove any
ash deposits.
H
D
CLEANING THE GLASS
It is recommended to clean the ceramic glass with a dry brush, or if it is very dirty, spray a little specific detergent and clean with a cloth.
ATTENTION!
Do not use abrasive products and do not spray the glass cleaning product on the painted parts and on the door
gaskets (ceramic fibre cord).
50
G
EXAMPLE OF A DIRTY BRAZIER
C