Battery Charging; Blocking Antenna While Making A Call; Correct/Incorrect Finger Position - UTStarcom CDM7176M Manual

Table of Contents

Advertisement

BATTERY USAGE

BATTERY CHARGING

POWER CONNECTION
1.
Plug the AC Charger into a standard outlet.
2.
Plug the other end of the AC Charger into the charging port on
your the right side of your phone. The battery must be installed
onto the phone to work properly.
• When you charge the battery with the phone powered off, you
Hot Key
will see a charging status screen. You cannot operate the phone
until it is powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace
the battery.
14
BLOCKING ANTENNA WHILE
CORRECT/INCORRECT FINGER
POSITION
CORRECT FINGER POSITION
Your phone is equipped with an intenna. For optimal call quality, hold
Note
the phone by the gripped edges on the side and avoid touching the top
and bottom of the phone.
MAKING A CALL
INCORRECT FINGER POSITION
15

Advertisement

Table of Contents
loading

Table of Contents