Call Sounds; Alert Sounds - UTStarcom CDM 1080 User Manual

SETTINGS

CALL SOUNDS

To select a ringer type for incoming calls:
CALL RINGTONE
1
Press [MENU], then select "Settings & Tools"
menu, then press
"Call Sounds", then press
2
Select your desired ringer type.
Up or Down key : Select "Ringer".
Press Play/Pause to Play/Pause the ringer.
3
Select one of the available ring types.
C
H
To confirm, press
4
CALL VIBRATE
1
Press [MENU], then select "Settings & Tools"
menu, then press
"Call Sounds", then press
2
Select "On" or "Off", then press
"Sounds" then select
"Call Ringtone".
[OK].
"Sounds" then select
"Call Vibrate".
[OK] to save it.
50
SETTINGS

ALERT SOUNDS

When selected, this setting alerts you to the following handset changes:
ERI TONES
1
Press [MENU], then select "Settings & Tools"
menu, then press
"Alert Sounds", then press
2
Select "Beep", "Voice" or "Off", then
press [OK] to save it.
TXT MESSAGE
1
Press [MENU], then select "Settings & Tools"
menu, then press
"Alert Sounds", then press
2
Select "Tone", "Vibrate" or "Reminder", then
select one of the following options.
Tone : Select your desired ringer type.
Vibrate : Select "On" or "Off".
Reminder : Select "Once", "Every 2 Minutes",
"Every 15 Minutes" or "Off".
3
To save, press [OK].
51
"Sounds" then select
"ERI Tones".
"Sounds" then select
"TXT Message".
C
H
4