Send Pix Msg. Group; Erase Group; Speed Dials - UTStarcom CDM 1080 User Manual

CONTACTS

SEND PIX MSG. GROUP

1
Press [MENU], then select "Contacts" menu,
then press
2
Select an existing group name with the
Navigation Key.
3
To select "Send Pix Msg", press
4
Input "Text", "Picture", "Sound", "Subject",
then press
"Add Quick Text", "Save As Drafts", "Priority
Level", "Remove Picture", "Remove Sound",
C
"Add Slide".
H
4
5
5.1. To send the pix message, press
5.2. To save the pix message, press
then select "Save as Drafts", then
press [OK].

ERASE GROUP

1
Press [MENU], then select "Contacts" menu,
then press
2
Select an existing group name with the
Navigation Key.
3
To select "Erase", press
4
Select "Yes" to erase it, press
"Groups".
[OPTIONS].
[OPTIONS] to select "Preview",
[SEND].
[OPTIONS]
"Groups".
[OPTIONS].
[OK].
42
CONTACTS

SPEED DIALS

In idle mode, calls can be placed to numbers stored in speed dial by
pressing & holding the location number on the key pad. For a 2-digit
location number, press the first number, then press and hold the
second number.
1
Press [MENU], then select "Contacts" menu,
then press "Speed Dials".
2
To assign a phone number to a location, select
the location then press
3
Select the contact with the Navigation Key then
press [OK]. To confirm, press
• "Unassigned" appears if the location is available.
• To call an assigned number, press & hold the last digit of the
speed dial #.
4
To select "Yes" or "No", press
5
"SPEED DIAL SET" will be displayed.
43
[SET].
C
[OK].
H
4
[OK].