Instructions For Use - Flex CS 40 WET Manual

or poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period.
However if the tool is used for different applications, with different accessories
or poorly maintained, the vibration emission may differ. This may significantly
decrease the exposure level over the total working period. Identify additional
safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
CAUTION!
Wear ear protection at a sound pressure above 85 dB(A).

Instructions for use

Before switching on the power tool
Unpack power tool and accessories and check that no parts are missing or
damaged.
Testing the PRCD
WARNING!
Test before each use.
 Plug into power outlet. Indicator light should turn on.
 Press the test button: Indicator light should turn off.
 Press and release the reset button. Indicator light should turn on. Do not
use if the above test fails.
This device does not protect against electrical shock due to contact with short
circuits or faulty wiring in the power supply.
Installing the blade
NOTE!
For your own safety and protection, do not attempt to operate this tile saw
until it is completely assembled and installed according to these instructions.
Read and understand the capability of the saw and the hazards associated
with its operation. Sandwich the diamond blade between the two flanges.
4 1/2" 20 mm arbor diamond dry/wet blades are suitable replacement blades
for this saw.
 Turn off the tool and remove the plug from the electrical outlet.
10
CS 40 WET