Operating Instructions - Flex CSM 4060 Manual

Portable circular saw for metals CSM 4060
kçíÉë
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure. The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure
level over the total working period.
For a precise estimation of the vibration load the
times should also be considered during which the
power tool is switched off or even running, but not
actually in use. This may significantly increase the
exposure level over the total working period
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
`~ìíáçå
tÉ~ê=É~ê=éêçíÉÅíáçå=~í=~ ëçìåÇ=éêÉëëìêÉ=
~ÄçîÉ=UR=Ç_E^FK

Operating instructions

a~åÖÉê>
_ÉÑçêÉ=Å~êêóáåÖ=çìí=~åó=ïçêâ=çå=íÜÉ=éçïÉê=
íççäI=~äï~óë=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Before switching on the power tool
Unpack the portable circular saw and check
that there are no missing or damaged parts.
Compare the mains voltage with the
specifications on the rating plate (5).
Attaching or changing the
saw blade
Pull out the mains plug.
Loosen the T-screws (7) and remove
the sawdust guard (15).
Press and hold down the spindle lock (9).
Loosen the locking screw (20 a) in an anti-
clockwise direction with a box wrench or
open-end wrench A/F 13.
21