Page 1
Double Tidy Rail Assembly Instructions 875/1698 - Please keep for future reference Dimensions Width - 89.5cm Depth - 38.5cm Height - 101/167.5cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800...
Page 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the • Assemble on a pad to avoid • We do not components and tools listed on damaging the unit or your floor. recommend the page 2.
Page 3
Components - Panels If you have damaged or missing components, call the Customer Helpline: 08456 400800 Please check you have all the panels listed below Rail x 2 (89cm) Bottom crossbar x 2 (83cm) Lower side support x 4 (87cm) Upper side support x 4 (78cm) (Inserted inside component 3) Components - Fittings Please check you have all the fittings listed below...
Page 4
Assembly Instructions Step 1 Note: It would be useful to ask someone to help you at this stage. Insert Bottom crossbar into Leg section Insert Lower side support into Leg section...
Page 5
Assembly Instructions Step 2 Finishing the Unit Insert Rail into Connectors Insert Upper side supports into Connectors Repeat steps to assemble the other Rail Insert Castors into Leg section...
Page 6
Assembly Instructions Step 3 Finishing the Unit Insert Locks onto the top of Lower side support . Align the Screw on Lock into the hole on Lower side support Inert Upper side supports into the Locks Note: It would be useful to ask someone to help you at this stage.
Need help?
Do you have a question about the Double Tidy Rail and is the answer not in the manual?
Questions and answers