Using a 128K ISDN Connection - MLP (set up a
connection to use both ISDN B-channels)
1. Right click on the new connection object you created above and select
Properties from the menu that appears.
2. Select Settings, or the Multilink tab if you have DUN 1.2.
3. Select Use additional devices.
4. Click Add.
5. Click Device name and add the second ISDN device listed.
Note: Make sure you select the other WaveRunner ISDN device. Most often,
you will use the same telephone number as before, but this will be
determined by your ISDN service provider.
16