Codabar - Socket D760 Programming Manual

To enable or disable Codabar, scan the appropriate barcode below.
Enable Codabar
Disable Codabar (default)
Set Lengths for Codabar
The length of a code refers to the number of characters (i.e., human readable characters), including
check digit(s) the code contains. Lengths for Codabar may be set for any length, one or two discrete
lengths, or lengths within a specific range. To set lengths, contact support@socketmobile.com.
• One Discrete Length - Select this option to decode only those codes containing a selected length.
• Two Discrete Lengths - This option sets the unit to decode only those codes containing two selected
lengths.
• Length Within Range - Select this option to decode a code within a specified range.
Codabar Any Length
• Any Length - Scan this option to decode Codabar symbols containing any number of characters.
1D SYMBOLOGIES
42